PDA

View Full Version : Dyno sheet 01 Cobra

BeachSnake
10-17-2008, 03:53 PM
My na 01 Cobra.

Mods: JLT CAI, BBK Twin 65 TB, Aluminum flywheel and Driveshaft, BBK Long tube headers, BBK catted x-pipe w/cut outs, Magnaflows, Tri-ax shifter, Y2K Cobra R's 18x9.5 w/BFG 275/35s all around.

Need to get pulleys and some other stuff.

John
travisnd
10-17-2008, 04:24 PM
Interesting, I would have thought the #'s would have been higher.
BeachSnake
10-17-2008, 05:09 PM
I thought the numbers would have higher as well. Replacing alot of parts soon I expect will rectify that though.


John
socalmach
10-17-2008, 07:04 PM
They're not terrible but they should be higher. The culprit is your air/fuel mixture.

Your a/f was never over 12.5 after the computer went into closed loop. Typically for an N/A motor a/f is around 12.8 - 13.1. It doesn't seem like much of a difference but that's where your power is. I would suggest getting a dyno tune and you'll see the numbers you were expecting.

Also, look at around 5500 rpm. It's below 12 and still falling. I'm not sure how rich the mixture needs to be before you start getting wash out. Maybe Ed can give a round about number with that.
ReoCamaro
10-17-2008, 07:12 PM
Abacus? I'm assuming they don't have a mustang dyno? right?
socalmach
10-17-2008, 08:56 PM
It's a Dynojet.
novajoe
10-18-2008, 10:10 AM
I would say talk to Ed and see what he says
blown02stang
10-27-2008, 10:57 PM
Call All Aspects and get ED Clark to tune it for you.
ReoCamaro
10-27-2008, 11:06 PM
Call All Aspects and get ED Clark to tune it for you.

I like All Aspects, Kienan (sp) is an awesome guy. Isn't Steen the place to go for the mustang tunes these days though?
blown02stang
10-27-2008, 11:15 PM
No. Steen Racing is no longer. Ed clark now tunes up at All Aspects. Ed was the one tuning the cars for Steen anyway. Last I heard, Jason Steen is working at Beach Ford.
ReoCamaro
10-28-2008, 08:14 AM
Oh really? See look at that, I've been away from the area for a year and everything falls apart.
socalmach
10-28-2008, 08:39 AM
He closed up shop earlier this year.
ReoCamaro
10-28-2008, 08:41 AM
I always thought that place was going to last forever. I thought DTP and Virginia Speed would have went under WAY before that place.
blown02stang
10-28-2008, 04:41 PM
He closed up shop earlier this year.

And it was great dumpster diving. I found a few good things.
socalmach
10-28-2008, 05:17 PM
Wish I'd of thought of that.